基于质谱技术的在线大气颗粒物来源与污染过程解析研究——以江苏省淮安市为例

通过大气细颗粒物实时在线源解析技术(质谱直接测量法)采集录入淮安市市区部分特征污染源排放成分谱,对淮安市大气细颗粒物进行在线源解析,获取高时间分辨的颗粒物源解析结果,分析颗粒物来源、季度变化和重污染天气的污染过程,评估形成重污染过程的污染影响因子和影响程度,为区域大气污染综合整治提供重要目标指向,同时也为淮安环境空气PM2.5重度污染实时预警与监控、大气污染源减排方案评估、污染事件监控等提供有效的在线监测技术平台.     

川东北低山丘陵区细颗粒物主要相关因素和季节变化分析——以南充主城区为例

基于中国空气质量在线监测分析平台和全球天气精准预报网的大气质量和气象数据,以四川盆地东北低山丘陵区典型城市南充市主城区为例,检验了细颗粒物(PM_(2.5))浓度的概率密度分布,发现其接近对数正态分布,由相关分析确定了PM_(2.5)浓度的主要相关因素为CO、NO_2(相关系数r分别为0.76、0.55,P0.01),再通过对2014年1月—2016年6月的日数据的逐步回归筛选出最优的回归指标和模拟方程(决定系数R_(adj)~2为0.68,P0.05),2016年7月—2017年6月的数据验证表明模拟效果较好(拟合优度为0.64,相对误差15.48%);最后根据时序插值、浓度和IAQI(PM_(2.5))的时段均值发现PM_(2.5)浓度在年际上有降低趋势;在季节上由高到低依次为冬季、春季、秋季、夏季;PM_(2.5)浓度在1月和6月分别呈现出年内的峰值和谷值,5、10月出现了阶段性峰值,尤其是5月;IAQI(PM_(2.5))的季节变化与浓度变化规律相似;且PM_(2.5)与PM_(10)比值的均值为0.67,表明现阶段南充市主城区大气污染物中细颗粒物占有较大比重。     

山西省2015年细颗粒物的污染状况和空间分布

大气污染因其对人体健康、生态环境和气候变化的影响而成为全球关注的环境问题,细颗粒物（PM_2.5）是雾霾产生的主要原因之一。为全面掌握山西省细颗粒物的污染状况与空间分布格局,本文运用统计学方法和Arc GIS技术,根据环境空气质量评价技术规范,对2015年山西省57个空气质量指数监测站提供的PM_2.5实时数据进行处理分析。结果表明：山西省PM_2.5的浓度有明显的季节性变化特征,由高到低依次为冬、春、秋、夏;PM_2.5月平均浓度最高值分别出现在1月和12月,且高值中心都位于运城;在空间分布上则表现为南部高于北部。全省11个地市级城市有9个超过国家二级标准,超标指数达到72%。聚类分析结果表明：山西省城市可以分为两大类,一类为产业结构转型良好的城市,如阳泉、朔州、吕梁、大同;另一类为第二产业发展粗放,工业污染严重的区域。     

成都市大气颗粒物粒径分布及水溶性离子组成的季节变化特征

利用Anderson冲击式分级采样器,于2012年2月~2013年1月在成都市城东成都理工大学校园内按月采集了不同粒径的大气颗粒物样品,分析了颗粒物样品的质量浓度以及9种水溶性离子含量.结果表明,采样期间成都市PM_(2.1)和PM_(11)的年平均浓度分别为(125.9±56.14)μg·m~(-3)和(224.5±83.64)μg·m~(-3),颗粒物浓度冬季最高,春季次之,秋季浓度最低;成都市水溶性离子浓度平均水平为37.15μg·m~(-3),其中检测的9种离子浓度从大到小顺序依次为SO_4~(2-)NO_3~-NH_4~+Ca~(2+)Cl~-Mg~(2+)K~+Na~+F~-,SO_4~(2-)、NO_3~-和NH_4~+占总水溶性离子的78%,是主要的离子组分.SO_4~(2-)、NO_3~-、NH_4~+呈单峰分布,其主要分布于细粒子中;Ca~(2+)和F~-也呈单峰分布,但是主要分布在粗粒子中;Cl~-和K~+粒径分布相似,Mg~(2+)和Na~+分布相似,均呈双峰分布.成都市冬、春季节粗、细颗粒物中的水溶性离子浓度均明显高于夏、秋季节.结合离子相关性分析,细颗粒物中的SO_4~(2-)、NO_3~-和NH_4~+可能主要以(NH_4)_2SO_4或NH_4HSO_4、NH_4NO_3的形式存在,而粗颗粒物中的主要离子组分SO_4~(2-)、NO_3~-和Ca~(2+)则可能以Ca(NO_3)2、CaSO_4等形式存在.主成分分析结果表明,颗粒物中水溶性离子主要来自二次过程、土壤扬尘、生物质燃烧和农业源.     

灰霾天气成因危害及控制治理

随着经济社会发展、城市迅速扩大和城市化进程加快,大气气溶胶污染日趋严重,由气溶胶颗粒物造成能见度恶化事件越来越多,灰霾天气已成为一种常见环境灾害污染事件。简要概述了灰霾天气定义分级、分布特征与雾霾比较,深入研究了灰霾天气形成原因、影响因素与存在危害,系统探讨了灰霾天气控制措施、监测方法与治理对策。指出在现有灰霾天气成因危害及控制治理状况下,加强理念宣贯,建立预报预警,开展PM2.5防治,推进城区绿化,科学布设规划,可有效解决中国资源节约型、环境友好型、生态文明型可持续发展过程中所面临灰霾天气防控治理问题。     

Further evidence of nuclear reactions in the Pd/D lattice: emission of charged particles

Almost two decades ago, Fleischmann and Pons reported excess enthalpy generation in the negatively polarized Pd/D-D₂O system, which they attributed to nuclear reactions. In the months and years that followed, other manifestations of nuclear activities in this system were observed, viz. tritium and helium production and transmutation of elements. In this report, we present additional evidence, namely, the emission of highly energetic charged particles emitted from the Pd/D electrode when this system is placed in either an external electrostatic or magnetostatic field. The density of tracks registered by a CR-39 detector was found to be of a magnitude that provides undisputable evidence of their nuclear origin. The experiments were reproducible. A model based upon electron capture is proposed to explain the reaction products observed in the Pd/D-D₂O system.

人体对空气颗粒物中硼吸收率的初步分析

为了研究人体对空气颗粒物中硼的吸收情况,为环境卫生标准的制定提供依据,采集硼作业工人班后尿液样品、上班8h的空气颗粒物样品以及24h饮食样品,分析了所有样品的硼质量浓度.结果表明:硼作业的原料工段工人班后尿硼肌酐校正质量比与经空气颗粒物潜在日硼摄人量之间没有显著的相关关系,而成品工段工人的班后尿硼肌酐校正质量比与经空气颗粒物潜在日硼摄人量之间存在着显著的正相关关系;对吸收率的分析表明,人体对空气颗粒物中以硼镁矿形态存在的硼吸收率仅为8.12%,而对以硼酸或者硼砂形态存在的硼吸收率约为74.2%,说明空气颗粒物中以硼镁矿形态存在的硼不容易进入人体血液,被人体吸收,而硼酸或者硼砂尘较易被人体吸收.     

Transformations of particles, metal elements and natural organic matter in different water treatment processes

Characterizing natural organic matter （NOM）, particles and elements in different water treatment processes can give a useful information to optimize water treatment operations. In this article, transformations of particles, metal elements and NOM in a pilot-scale water treatment plant were investigated by laser light granularity system, particle counter, glass-fiber membrane filtration, inductively coupled plasma-optical emission spectroscopy, ultra filtration and resin absorbents fractionation. The results showed that particles, NOM and trihalomethane formation precursors were removed synergistically by sequential treatment of different processes. Preozonation markedly changed the polarity and molecular weight of NOM, and it could be conducive to the following coagulation process through destabilizing particles and colloids; mid-ozonation enhanced the subsequent granular activated carbon （GAC） filtration process by decreasing molecular weight of organic matters. Coagulation-flotation and GAC were more efficient in removing fixed suspended solids and larger particles; while sand-filtration was more efficient in removing volatile suspended solids and smaller particles. Flotation performed better than sedimentation in terms of particle and NOM removal. The type of coagulant could greatly affect the performance of coagulation-flotation. Pre-hydrolyzed composite coagulant （HPAC） was superior to FeCl3 concerning the removals of hydrophobic dissolved organic carbon and volatile suspended solids. The leakages of flocs from sand-filtration and microorganisms from GAC should be mitigated to ensure the reliability of the whole treatment system.     

北京餐饮源排放细粒子理化特征及其对有机颗粒物的贡献

调研了北京餐饮业发展现状,通过在线监测、采样分析等手段研究北京4家不同烹调方式的餐馆所排放颗粒物的质量浓度、粒径分布、形貌特征、化学组分,并初步估算餐饮源排放细粒子对北京细粒子中颗粒有机物的贡献.结果表明,餐馆的原料、烹饪过程、油烟去除装置以及客流量都会影响餐馆所排放颗粒物的物理、化学性质.样本餐馆营业期间排放颗粒物PM_{2 .5}质量浓度是当日环境大气PM_{2 .5}质量浓度的8～35倍,PM_{1 .0}在PM_{2 .5}的质量浓度中约占50%～85%.餐饮源排放颗粒物多以固态和液态颗粒物形貌存在,化学组分质量百分数由多到少依次是有机物、无机离子和元素碳,分别占到PM_{2 .5}质量浓度的70%左右、5%～11%和小于2%.初步估计结果表明,北京餐饮源排放细粒子对有机颗粒物的贡献和交通源的排放相当,成为北京细粒子有机颗粒物的主要来源之一.认识餐饮源排放颗粒物的理化性质,可以为改善北京空气质量和保证居民身体健康提供数据支持.     

Ash deposition impact on the energy performance of photovoltaic generators

A little known side effect of the atmospheric air pollution is the degradation of photovoltaic (PV) cells’ performance due to the deposition of solid particles varying in composition, size and origin. In this context, an experimental-based investigation is conducted in order to compare the energy performance of two identical pairs of PV-panels; the first being clean and the second being artificially polluted with ash, i.e. a by-product of incomplete hydrocarbons’ combustion mainly originating from thermal power stations and vehicular exhausts. A series of systematic measurements of current intensity, voltage output and solar radiation are executed simultaneously for the clean and the polluted PV-panel, so that the effect of several mass depositions on the PVs’ power output, energy yield and conversion efficiency may be determined. According to the results, a considerable deterioration of the PV-panels’ performance is obtained, i.e. almost 30% energy reduction per hour or 1.5% efficiency decrease (in absolute terms) for ash accumulation on the panels’ surface reaching up to 0.4 mg/cm².